Paper and specialty media guide
Notes:
•
Make sure that the paper size, type, and weight are set correctly on the computer or control panel.
•
Flex, fan, and straighten specialty media before loading them.
•
The printer may print at a reduced speed to prevent damage to the fuser.
•
For more information on card stock and labels, see the
Card Stock & Label Guide
on the Lexmark
support Web site at
Using specialty media
Tips on using letterhead
•
Use letterhead designed specifically for laser printers.
•
Print a test page on the letterhead being considered for use before buying large quantities.
•
Before loading letterhead, flex, fan, and straighten the stacks to prevent sheets from sticking together.
•
Page orientation is important when printing on letterhead.
Source
Printing
Printable
side
Paper
orientation
Trays
ABC
One
‑
sided
Faceup
Load the sheet
with the top edge
entering the
printer first.
Trays
ABC
Two
‑
sided
Facedown
Load the sheet
with the bottom
edge entering
the printer first.
Note:
Check with the manufacturer or vendor to determine whether or not the preprinted letterhead is
acceptable for laser printers.
Paper and specialty media guide
43
Summary of Contents for CS410 series
