If the printer is installed on a network, then you can use the Embedded Web Server to do the following:
•
View the virtual display of the printer control panel.
•
Check the status of the printer supplies.
•
Configure supply notifications.
•
Configure printer settings.
•
Configure network settings.
•
View reports.
To access the Embedded Web Server for your printer:
1
Obtain the printer IP address:
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Notes:
–
An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
–
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Open a Web browser, and then type the printer IP address in the address field.
3
Press
Enter
.
The Embedded Web Server page appears.
Learning about the printer
16
Summary of Contents for CS410 series
