manualshive.com logo in svg

Lenovo ThinkServer TD350 70DG, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer TD350 70DG is a high-performance server designed to meet the demands of any business. With its advanced features and robust hardware, this server ensures efficient and reliable performance. To get the most out of this product, download the User Manual and Hardware Maintenance Manual for free at manualshive.com.

Share
Download
background image

• If you do not want to save the new settings, select

Save & Exit

➙

Discard Changes and Exit

.

• If you want to return to the default settings, press F9 or select

Save & Exit

➙

Load Optimized Defaults

.

For more information about the

Save & Exit

menu in the Setup Utility program, see “Save & Exit menu”

on page 57.

Updating or recovering the BIOS

This topic provides instructions on how to update the BIOS and how to recover from a POST and BIOS
update failure.

Lenovo might make changes and enhancements to the BIOS and TSM firmware. When updates are released,
they are available for download on the Lenovo Web site at http://www.lenovo.com/drivers. You can update
the server firmware by downloading an update package and following the instructions on the Web page.

Updating (flashing) the BIOS

This topic provides instructions on how to update (flash) the BIOS.

Notes:

• Update the BIOS on your server only if the newer BIOS version specifically solves a problem you have.

We do not recommend BIOS updates for servers that do not need them. You can view the updated
information for the new BIOS version in the installation instructions for the BIOS update utility program.

• Downgrading the BIOS to an earlier version is not recommended and might not be supported. An earlier

BIOS version might not support the latest system configurations.

• If the power to your server is interrupted while the POST and BIOS are being updated, your server might

not restart correctly. Ensure that you perform the BIOS update procedure in an environment with a
steady power supply. Besides, ensure that your server can restart successfully without encountering
hardware problems.

• After updating the BIOS firmware, all of your previous BIOS settings will be automatically restored. Check

and reconfigure the BIOS settings for your specific needs.

To update (flash) the BIOS, do the following:

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate the BIOS

update package.

2. Download the BIOS update package and the TXT file that contains installation instructions.

3. Print the TXT file and follow the instructions to update (flash) the BIOS.

4. Check and reconfigure the BIOS settings for your specific needs based on your note or refer to “Using

the Setup Utility program” on page 55 after the BIOS update process is completed.

Recovering from a BIOS update failure

If the power to your server is interrupted while the BIOS is being updated, your server might not restart
correctly. If this happens, perform the following procedures to recover from the BIOS update failure.

Note:

If the operating system of your server is installed under EFI mode, you must reinstall the operating

system after recovering the BIOS.

To recover from a BIOS update failure, do one of the following:

•

Using the automatic recovery feature

1. Reconnect the server to an ac power source.

Chapter 5

.

Configuring the server

61

Summary of Contents for ThinkServer TD350 70DG





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD350 70DG

IBM 990 Reference Manual preview
990
Brand: IBM Pages: 88
TYAN TN76-BP016 Service Manual preview
TN76-BP016
Brand: TYAN Pages: 109
ONELAN OMNI-HD1 Installation & Configuration Manual preview
OMNI-HD1
Brand: ONELAN Pages: 24
Lucent Technologies Definity 8510T User Manual preview
Definity 8510T
Brand: Lucent Technologies Pages: 85
Supero SUPERO SuperServer 6026TT-H6IBQRF User Manual preview
SUPERO SuperServer 6026TT-H6IBQRF
Brand: Supero Pages: 110
IBM BladeCenter HS20 Type 8843 Installation And User Manual preview
BladeCenter HS20 Type 8843
Brand: IBM Pages: 112
Speco ONSIP OS101 User Manual preview
ONSIP OS101
Brand: Speco Pages: 28
Fujitsu SPARC Enterprise M3000 Service Manual preview
SPARC Enterprise M3000
Brand: Fujitsu Pages: 202
Fujitsu SPARC Enterprise M4000 Service Manual preview
SPARC Enterprise M4000
Brand: Fujitsu Pages: 310
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual preview
SPARC Enterprise M3000
Brand: Fujitsu Pages: 560
Fujitsu SPARC Enterprise M4000 Installation Manual preview
SPARC Enterprise M4000
Brand: Fujitsu Pages: 76
NASdeluxe NDL-2400R-R Quick Installation Manual preview
NDL-2400R-R
Brand: NASdeluxe Pages: 6
Oracle SPARC T8 Series Licensing Information User Manual preview
SPARC T8 Series
Brand: Oracle Pages: 12
Kathrein EXIP 414 Manual preview
EXIP 414
Brand: Kathrein Pages: 20
Lantronix CoBox-Micro User Manual preview
CoBox-Micro
Brand: Lantronix Pages: 110
AirLive WP-201G V2 User Manual preview
WP-201G V2
Brand: AirLive Pages: 97
W&T 53641 Manual preview
53641
Brand: W&T Pages: 79
Texas Instruments Codec Engine Server User Manual preview
Codec Engine Server
Brand: Texas Instruments Pages: 36

Brands by name

Popular brands

Load more brands