manualshive.com logo in svg

Lenovo ThinkServer TD350 70DG, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer TD350 70DG is a high-performance server designed to meet the demands of any business. With its advanced features and robust hardware, this server ensures efficient and reliable performance. To get the most out of this product, download the User Manual and Hardware Maintenance Manual for free at manualshive.com.

Share
Download
background image

• Internal storage drive

Depending on the model, your server supports different storage drives, such as hard disk drives or
solid-state drives. The term “2.5-inch hot-swap drives” or “2.5-inch drives” hereinafter refers to all the
supported types of 2.5-inch drives, including the solid-state drives.

Drive bay

Supported drive type

Eight 2.5-inch drive bays

Hot-swap, SATA

Hard disk drive

Eight 2.5-inch drive bays

Hot-swap, SATA or SAS

Hard disk drive or solid-state drive

Sixteen 2.5-inch drive bays

Hot-swap, SATA or SAS

Hard disk drive or solid-state drive

Thirty-two 2.5-inch drive bays

Hot-swap, SATA or SAS

Hard disk drive or solid-state drive

Five 3.5-inch drive bays

Easy-swap, SATA

Hard disk drive

Five 3.5-inch drive bays

Hot-swap, SATA

Hard disk drive

Fifteen 3.5-inch drive bays

Hot-swap, SATA or SAS

Hard disk drive or solid-state drive

Note:

For server models with fifteen 3.5-inch-drive bays, you can install 2.5-inch drives and 3.5-inch

drives into the same server. For more information, see “Installing a 2.5-inch drive into a 3.5-inch-drive
bay” on page 147.

• Optical drive

– Up to two 5.25-inch SATA optical drives

The server has two optical drive bays. The lower optical-drive bay is installed with a 5.25-inch SATA
optical drive. The upper bay is for a secondary optical drive. Some server models come with a
secondary optical drive installed in the upper bay.

– Up to two SATA slim optical drives

The server has two optical drive bays. The lower optical-drive bay is installed with a SATA slim optical
drive. The upper bay is for a secondary slim optical drive. Some server models come with a secondary
slim optical drive installed in the upper bay.

• Tape drive

Your server supports an internal tape drive that enables you to store data on tape media. For more
information, see “Installing or replacing an internal tape drive” on page 133.

To locate the internal drives or drive bays, see “Front view of the server” on page 18.

External drives

If your server has a host bus adapter (HBA) installed, an external storage device can be connected to store
data. For more information, refer to the documentation that comes with the external storage device.

Expansion slots

The server has seven expansion slots on the system board for installing appropriate Peripheral Component
Interconnect Express (PCIe) cards. For detailed information, see “System board components” on page 44.

10

ThinkServer TD350 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer TD350 70DG





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD350 70DG

Zonet ZUH2000 - User Manual preview
ZUH2000 -
Brand: Zonet Pages: 33
Leightronix UltraNEXUS-HD X5 Product Quick Manual preview
UltraNEXUS-HD X5
Brand: Leightronix Pages: 5
AIC SB302-LB User Manual preview
SB302-LB
Brand: AIC Pages: 101
IBM Netfinity 5000 Setup And Installation Manual preview
Netfinity 5000
Brand: IBM Pages: 24
RackSolutions 4Post Installation Instructions Manual preview
4Post
Brand: RackSolutions Pages: 8
Supermicro SuperServer E300-9A-4C User Manual preview
SuperServer E300-9A-4C
Brand: Supermicro Pages: 109
Autonomic Mirage MMS-1e Setup Manual preview
Mirage MMS-1e
Brand: Autonomic Pages: 17
Supermicro SSG-927R-E2CJB User Manual preview
SSG-927R-E2CJB
Brand: Supermicro Pages: 62
HPE ProLiant ML110 Gen 10 Product End-Of-Life Disassembly Instructions preview
ProLiant ML110 Gen 10
Brand: HPE Pages: 5
IOGear GPSU21 Installation Manual preview
GPSU21
Brand: IOGear Pages: 48
Xerox 6180DN - Phaser Color Laser Printer Install Manual preview
6180DN - Phaser Color Laser Printer
Brand: Xerox Pages: 2
Raritan DOMINION KSX II User Manual preview
DOMINION KSX II
Brand: Raritan Pages: 362
DSP 104-plus Reference Manual preview
104-plus
Brand: DSP Pages: 140
F5 Acopia ARX 500/A106 Manual preview
Acopia ARX 500/A106
Brand: F5 Pages: 13
Ioimage trk4000 Installation Manual preview
trk4000
Brand: Ioimage Pages: 72
Dataton WATCHPAX 60 User Manual preview
WATCHPAX 60
Brand: Dataton Pages: 37
Planet NAS-7102 User Manual preview
NAS-7102
Brand: Planet Pages: 68
SeeedStudio reServer Getting Started preview
reServer
Brand: SeeedStudio Pages: 19

Brands by name

Popular brands

Load more brands