Lenovo ThinkServer TD350 70DG, User Manual And Hardware Maintenance Manual

Page: 115 / 220

6. Remove the RAID 510i upgrade key from the Lenovo ThinkServer RAID 510i AnyRAID Adapter.
Note: If necessary, remove the Lenovo ThinkServer RAID 510i AnyRAID Adapter first for easier
operation. Then, reinstall the Lenovo ThinkServer RAID 510i AnyRAID Adapter. See “Replacing the
AnyRAID adapter” on page 156.
Figure 57. Removing the RAID 510i upgrade key
7. Reinstall any parts and reconnect any cables that you have removed.
8. If you are instructed to return the old RAID 510i upgrade key, follow all packaging instructions and use
any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 175. Because the
hardware RAID 5 and 50 levels are not available without the RAID 510i upgrade key, you might need to
reconfigure RAID for your server. For information about how to configure the hardware RAID, refer to the
MegaRAID SAS Software User Guide on the documentation DVD that comes with your server.
Installing or removing the flash module
This topic applies only to AnyRAID adapters that support the flash module.
The flash module works as the cache memory of the installed AnyRAID adapter. You can purchase a flash
module from the Lenovo Web site at:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
Installing the flash module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Use any documentation that comes with the flash module and follow those instructions in addition to
the instructions in this topic.
Chapter 6
.
Replacing hardware
101