Lenovo ThinkServer TD350 70DG User Manual And Hardware Maintenance Manual Download Page 168 | Manualshive

Page: 168 / 220

Lenovo ThinkServer TD350 70DG User Manual And Hardware Maintenance Manual Download Page 168

This topic applies only to server models that have a ThinkServer RAID Super Capacitor Module installed.
Depending on the model, the server might come with up to three ThinkServer RAID Super Capacitor Modules.

The ThinkServer RAID Super Capacitor Module protects the cache memory on the installed RAID card or
AnyRAID adapter. You can purchase a ThinkServer RAID Super Capacitor Module from the Lenovo Web site
at:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Depending on the model, your server might come with up to three ThinkServer RAID Super Capacitor

Modules.

• Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow those

instructions in addition to the instructions in this topic.

To replace the ThinkServer RAID Super Capacitor Module, do the following:

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server. If

the server is in tower form factor, lay the server on its side for easier operation.

3. Remove the server cover. See “Removing the server cover” on page 70.

4. Disconnect the cable from the ThinkServer RAID Super Capacitor Module. Remove the screw that

secures the ThinkServer RAID Super Capacitor Module and then disengage it from the chassis.

Figure 118. Removing the ThinkServer RAID Super Capacitor Module with the bracket from the chassis

154

ThinkServer TD350 User Guide and Hardware Maintenance Manual

«
...
166
167
168
169
170
...
»

Summary of Contents for ThinkServer TD350 70DG





























































































































































































































Reviews:

No comments