manualshive.com logo in svg

Lenovo ThinkServer TD350 70DG, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer TD350 70DG is a high-performance server designed to meet the demands of any business. With its advanced features and robust hardware, this server ensures efficient and reliable performance. To get the most out of this product, download the User Manual and Hardware Maintenance Manual for free at manualshive.com.

Share
Download
background image

• Lenovo ThinkServer RAID 720i AnyRAID Adapter

• Lenovo ThinkServer RAID 720ix AnyRAID Adapter

To connect the mini-SAS to PCIe signal cable (hereinafter referred to as the Y cable) from the system
board to the AnyRAID adapter, do the following:

1. Use one Y cable. Connect the dual-in connectors on one end of the Y cable to the PCI-E 0 connector

and the PCI-E 1 connector on the AnyRAID adapter.

2. Connect the single connector on the other end of the Y cable to the AnyRAID connector 1–2 on the

system board.

To locate the connectors, refer to the related topics in “Locations” on page 17.

Connecting the I2C to I2C signal cable and mini-SAS to PCIe signal cables for server
models supporting up to thirty-two 2.5-inch drives

Two Lenovo ThinkServer RAID 720ix AnyRAID Adapters must be installed on server models that support
up to thirty-two 2.5-inch drives. The upper Lenovo ThinkServer RAID 720ix AnyRAID Adapter is adapter 0
and the lower one is adapter 1.

To connect the I2C to I2C signal cable and two mini-SAS to PCIe signal cables (hereinafter referred to as
the Y cable) , do the following:

1. Prepare the I2C to I2C signal cable and two Y cables.

2. Connect one Y cable from the system board to adapter 1. See “Connecting the mini-SAS to PCIe signal

cable from the system board to the AnyRAID adapter” on page 41.

3. Install the PCIE interposer card into the PCIe card slot 3 on the system board.

Figure 24. Installing the PCIE interposer card

4. Connect the dual-in connectors on one end of the second Y cable to the PCI-E 0 connector and the

PCI-E 1 connector on adapter 0.

5. Connect the single connector on the other end of the second Y cable to the PCIE connector on the

PCIE interposer card.

42

ThinkServer TD350 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer TD350 70DG





























































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD350 70DG

Point Six Link Manager 4010-43 Manual preview
Link Manager 4010-43
Brand: Point Six Pages: 131
IBM Flex System x440 Compute Node Installation And Service Manual preview
Flex System x440 Compute Node
Brand: IBM Pages: 584
Supermicro SuperServer 5039MD18-H8TNR User Manual preview
SuperServer 5039MD18-H8TNR
Brand: Supermicro Pages: 134
Supermicro SUPERSERVER 2048U-RTR4 User Manual preview
SUPERSERVER 2048U-RTR4
Brand: Supermicro Pages: 152
Integra NAS-2.3 Instruction Manual preview
NAS-2.3
Brand: Integra Pages: 40
ASROCK Rack 4U60L Series User Manual preview
4U60L Series
Brand: ASROCK Rack Pages: 51
IBM 8668 - Eserver xSeries 232 Hardware Maintenance Manual preview
8668 - Eserver xSeries 232
Brand: IBM Pages: 182
I-O DATA FIDATA HFAS1-S10U Setup Manual preview
FIDATA HFAS1-S10U
Brand: I-O DATA Pages: 46
QNAP TVS- 72XU Series User Manual preview
TVS- 72XU Series
Brand: QNAP Pages: 56
Samsung SNT-1010 Specifications preview
SNT-1010
Brand: Samsung Pages: 1
Samsung MIM-D00 Installation Manual preview
MIM-D00
Brand: Samsung Pages: 28
Samsung SNT-1010 User Manual preview
SNT-1010
Brand: Samsung Pages: 51
Samsung SMARTSERVER 370 User Manual preview
SMARTSERVER 370
Brand: Samsung Pages: 72
Samsung TC222L User Manual preview
TC222L
Brand: Samsung Pages: 94
Samsung IPX-S300B System Description preview
IPX-S300B
Brand: Samsung Pages: 162
Samsung Webthru SWC 306 User Manual preview
Webthru SWC 306
Brand: Samsung Pages: 33
Samsung MIM-D00 User Manual preview
MIM-D00
Brand: Samsung Pages: 52
Samsung SmartServer 3840 Installation Manual preview
SmartServer 3840
Brand: Samsung Pages: 67

Brands by name

Popular brands

Load more brands