Lenovo ThinkServer TD350 70DG User Manual And Hardware Maintenance Manual Download Page 21 | Manualshive

Page: 21 / 220

Lenovo ThinkServer TD350 70DG User Manual And Hardware Maintenance Manual Download Page 21

Chapter 3. Product overview

This chapter contains the following items:

•

“Server form factor” on page 7

•

“Server package” on page 7

•

“Features” on page 8

•

“Specifications” on page 13

•

“Software” on page 14

•

“Locations” on page 17

Server form factor

The server is designed to support both tower and rack form factors. Most server components are the same
between the two form factors. The difference is that the tower-form-factor server models come with foot
stands, and the rack-form-factor server models come with rack handles. Most illustrations shown in this
documentation are based on the tower-form-factor server model.

Server package

Note:

Depending on the model, your server might look different from the following illustration.

© Copyright Lenovo 2014, 2015

7

«
...
19
20
21
22
23
...
»

Summary of Contents for ThinkServer TD350 70DG





























































































































































































































Reviews:

No comments