Figure 121. Top cover installation
After you finish
Complete the parts replacement. See
“Complete the parts replacement” on page 140
VGA cable replacement
Use the following information to remove and install the VGA cable.
Remove the VGA cable (2.5-inch drive model)
Use this information to remove the VGA cable for the 2.5-inch drive model.
About this task
Attention:
• Read the following section(s) to ensure that you work safely.
–
–
“Installation Guidelines” on page 51
• Turn off the server. Disconnect the power cords and all external cables. See
• If the server is installed in a rack, remove the server from the rack.
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
Step 1. Make preparations for this task.
a. Remove the top cover. See
“Remove the top cover” on page 132
b. Remove the front operator panel (2.5-inch drive model). See
“Remove the front operator panel
(2.5-inch drive model)” on page 81
Step 2. Remove the VGA cable.
.
Hardware replacement procedures
135
Summary of Contents for 7D7Q
