LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 99 / 211

PRO1 Sentry Switched DC PDU
99 of 211
Network > FTP
The FTP configuration page allows configuring the settings required for the FTP client to perform FTP firmware
uploads and automatic system uploads/downloads.
To configure FTP client options:
1. Type the hostname/IP addresses in the Host field (IPv4 or IPv6 format).
2. Type the FTP username in the Username field, 1-32 characters, spaces are allowed.
3. Provide a password for the FTP username. To change the password, check the Change box and type the
new password.
4. Type the file path to be uploaded to the Directory field.
5. Type the filename to be uploaded in the Filename field.
6. The PDU is capable of scheduling automatic firmware updates. When enabled and configured, the PDU
regularly checks the FTP server for a new firmware image and uploads the image. To enable Automatic
Updates, check the Enable checkbox.
7. From the Scheduled Day and Scheduled Hour drop-down menus, select the desired day/hour for the
automatic update to occur.
8. The FTP upload configuration validates that the unit is able to contact and log into the specified FTP
server, download the firmware file, and verify that the firmware file is valid for the unit. To initiate the
test, click the
Test button.
To configure FTP server options:
1. In the FTP Server area at the bottom of the page, check the Enable checkbox.
Notes:
•
The FTP server must be enabled for configuration upload or download.
•
Secure File Transport Protocol (SFTP) is also supported for encrypted SSH transport over the network.