LEGRAND 48DCWC-04-2X100-D0NB User Manual Download Page 162

Page: 162 / 211

PRO1 Sentry Switched DC PDU

162 of 211

lstat

Displays the latest status and metrics for all lines in the system.

Command Syntax

lstat

Command Access

System monitor access

off

Turns off the specified outlet or outlet group.

Command Syntax

off <name | id | group | ALL>

Usage Guidelines

The

off

command is for Switched PRO1 products only.

Command Access

User level and above

Turns on the specified outlet or outlet group.

Command Syntax

on <name | id | group | ALL>

Usage Guidelines

The

command is for Switched PRO1 products only.

Command Access

On-Only users or User level and above

ostat

Displays the latest status and metrics for all outlets in the system.

Command Syntax

ostat <name | outlet | outlet id | group | ALL>

Command Access

System monitor access

Summary of Contents for 48DCWC-04-2X100-D0NB




















































































































































































































Search results

Summary of Contents for 48DCWC-04-2X100-D0NB

Reviews:

Brands by name

Popular brands

LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Search results

Summary of Contents for 48DCWC-04-2X100-D0NB

Reviews:

Brands by name

Popular brands