LEGRAND 48DCWC-04-2X100-D0NB User Manual Download Page 26

Page: 26 / 211

Sentry Switched DC PDU

26 of 211

Fuses

–

Bussmann GMT

Overview of the Bussmann GMT fuses for the PRO1 Sentry Switched DC PDU:

About the Bussmann GMT Fuses:

•

Fast Acting Indicating Fuse

•

All models that accept GMT fuses include 10A fuses (part #FUSE-GMT-10A/G)

•

All model that accept GMT fuse include fuse covers (part #GMT-X) that also act as a fuse removal and
insert tool.

•

Optional, sold separately, fuse values available from Server Technology (amps): 3/4, 1.0, 1.5, 2, 3, 5,
7.5, 10.

Part numbers:

FUSE-GMT-3/4/G

FUSE-GMT-1.0A/G

FUSE-GMT-1.5A/G

FUSE-GMT-2A/G

FUSE-GMT-3A/G

FUSE-GMT-5A/G

FUSE-GMT-7.5A/G

Summary of Contents for 48DCWC-04-2X100-D0NB




















































































































































































































Search results

Summary of Contents for 48DCWC-04-2X100-D0NB

Reviews:

Brands by name

Popular brands

LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Search results

Summary of Contents for 48DCWC-04-2X100-D0NB

Reviews:

Brands by name

Popular brands