LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 167 / 211

PRO1 Sentry Switched DC PDU
167 of 211
set branch
Sets branch configuration values.
Command Syntax
set branch email [disabled | enabled] <name | id | ALL>
set branch load [alarmhi | alarmlo | warnhi | warnlow] <name | id | ALL> <value>
set branch load hyst <value>
set branch snmpt [disabled | enabled] <name | id | ALL>
Parameters
The set branch command uses the following parameters:
email Email notifications for branch events.
hyst Hysteresis between event state and recovery (0.0 to 10.0).
load Current load for a branch.
min=0A; max (max current) in
show branches command; hyst=0.0-10.0A; default-
1.0A.
snmpt SNMP trap notifications for branch events.
Sub Parameters
The set branch command uses the following sub-parameters:
alarmhi High alarm value.
alarmlo Low alarm value.
warnhi High warning alarm.
warnlo Low warning alarm.
Usage Guidelines
min <= alarmlo <= warnlo <= warnhi <= alarmhi <= max
Command Access
Admin level only