LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 134 / 211

PRO1 Sentry Switched DC PDU
134 of 211
About the Reset Button on the Sentry DC PDU:
The PDU is designed with a Reset button on the hardware unit that can be used when a forgotten firmware
password prevents logging into the unit. The Reset button sets all configuration values back to factory default
settings, allowing the administrator to retrieve the admn/admn default administrator login.
To access the button on the unit, you need a non-conductive metallic tool that fits inside the recess. If you press
and hold the
Reset button on the unit for more than 15 seconds, the reset action will terminate.
Note: This method of physical access to the unit will not work if the Reset button has already been disabled by the
administrator through the firmware GUI at Configuration > Access > General > Configuration
Reset Button , or through the firmware CLI with the set access button [ enabled/disabled ] command.
For security, the administrator can choose to disable the button through firmware to inhiibit a user from causing
a reset on the unit.