LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 169 / 211

PRO1 Sentry Switched DC PDU
169 of 211
set feature
Enables new system features.
Command Syntax
set feature <feature key>
Parameters
The set feature command uses the following parameter:
feature key Key for unlocking system features (XXXX-XXXX-XXXX-XXXX), where X = 0-9 or
A-Z.
Command Access
Admin level only
set ldapgroup
Sets configuration values for LDAP group access rights.
Command Syntax
set ldapgroup access [admin }| admin | ononly | poweruser | rebootonly | user |
viewonly] <groupname>
set ldapgroup sysmon [disabled | enabled] <groupname>
Parameters
The set ldap group command uses the following parameters:
access Sets the access type of an LDAP group.
Note: On-Only, Reboot-Only, and View-Only are available for Switched PRO1
products.
sysmon Sets system monitor access for an LDAP group.
Sub-Parameters
The set ldap group command uses the following sub-parameter:
groupname Name of the LDAP group to change access rights. 0-32 characters.
Command Access
Admin level only