LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 121 / 211

PRO1 Sentry Switched DC PDU
121 of 211
Access (Managing Users)
The Access section of the Web interface determines how a PRO1 PDU user works with the network and system by
configuring the options related to a user: authentication, privilege levels, user access to the unit, and additional
functions for individual local users and user groups.
Note: The Access section only allows the administrator to determine how the user will access and use the
network and system. To set up network protocol parameters, see the Network section.
Access > General
The General page allows configuration of local and remote access settings.
To configure general system access:
Access Method: From the drop-down menu, select an option to enable one of several authentication methods to
control user access to the PDU. Only one method can be enabled at a time: Local Only (default), LDAP Only, LDAP
Then Local, RADIUS Only, RADIUS Then Local, Only, Then Local.
Button Configuration Reset: Check (or uncheck) the Enable checkbox to enable (or disable) physical access to the
Reset button on the PRO1 hardware.
The PDU is designed with a reset button on the hardware unit that can be used when a forgotten firmware
password prevents logging into the unit. The reset button sets all configuration values back to factory default
settings, allowing the administrator to retrieve the admn/admn default administrator login.
To access the button on the unit, you need a non-conductive metallic tool that fits inside the recess. If you press
and hold the
Reset button on the unit for more than 15 seconds, the reset action will terminate.
Note: This method of physical access to the unit will not work if the reset button has already been disabled by the
administrator through the firmware GUI at Configuration > Access > General > Button Configuration Reset (show
in the screen example above) or through the firmware CLI with the set access button [ enabled/disabled]
command. For security, the administrator can choose to disable the button through firmware to inhiibit a user
from causing a reset on the unit.