LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 181 / 211

PRO1 Sentry Switched DC PDU
181 of 211
set ups
Sets UPS device configuration values.
Command Syntax
set ups addline <UPS#> <line name | id | ALL>
set ups commstr <UPS#> <get community string>
set ups delline <UPS#> <line name | id | ALL>
set ups host <UPS#> <hostname>
set ups oidspoll <UPS#> <oid>
set ups onbattery <UPS#> <value>
set ups onutility <UPS#> <value>
set ups port <UPS#> <port>
set ups type <UPS#> <value>
Parameters
The set ups command uses the following parameters:
UPS# The number of the UPS to change. 1-8.
addline Adds the specified line to be protected by the UPS.
commstr Sets the community string for polling the UPS by SNMP. 0-32 characters.
delline Removes the specified line from a UPS.
host Hostname for polling the UPS by SNMP. 0-63 characters.
oidspoll The OID for getting the “on battery”/“on utility” value when polling the UPS
by SNMP.
onbattery Value of the OID when the UPS is in an “on battery” state. 1 -65535.
onutility Value of the OID when the UPS is in an “on utility” state. 1 -65535.
port Port number for polling the UPS by SNMP. 1-65535 (default 161).
type Sets the type of the UPS; sets default commstr, oidspoll, onbattery, onutility,
and port. 1-11.
Sub-Parameters
The set ups command uses the following sub-parameter:
oid The OID string with sequences of a dot and a number. 1-65535.
Command Access
Admin level only