LEGRAND 48DCWC-04-2X100-D0NB, User Manual

Page: 182 / 211

PRO1 Sentry Switched DC PDU
182 of 211
set user
Sets configuration values for local user access rights.
Command Syntax
set user access [admin | ononly | poweruser | rebootonly | user | viewonly] <username>
set user password <username> {password} {verify password}
set user sysmon [disabled | enabled] <username>
Parameters
The set user command uses the following parameters:
access Sets the access type of a local user.
Note: On-Only, Reboot-Only, and View-Only are available for Switched PRO1
products.
password Sets the password for a local user.
sysmon Sets system monitor access for a local user.
Sub-Parameters
The set user command uses the following sub-parameter:
username The ID of the local user to change access rights. 0-32 characters.
Command Access
Admin level only