LeCroy WaveRunner 104MXI Operator'S Manual Download Page 87

Page: 87 / 233

PERATOR

’

ANUAL

WRXi-OM-E Rev B

4. Touch

inside

the

Source1

field and select an input waveform from the pop-up menu.

5. Touch

inside

the

Measure

field and select a parameter from the pop-up menu.

6. Touch

the

Track

button

at the bottom of the dialog; then, from the

Math selection for Track

menu, select a math function location (F1 to Fx The number of math traces available depends on the software
options loaded on your oscilloscope. See specifications.) to store the Track display. The Track will be

displayed along with the trace label

Example Track Trace Label for the math function you

selected.

7. Touch the newly displayed Track math function trace label if you want to change any settings in the

Track

dialog:

HISTOGRAMS

Creating and Viewing a Histogram

Note:

The number of sweeps comprising the histogram will be displayed in the bottom line of the trace

descriptor label:

Single Parameter Histogram Setup

ROM

EASURE

IALOG

1. In the menu bar, touch

Measure

, then

Measure Setup

2. Touch

the

My Measure

button.

3. Touch one of tabs

through

4. Touch

inside

the

Source1

field and select an input waveform from the pop-up menu.

5. Touch

inside

the

Measure

field and select a parameter from the pop-up menu.

6. Touch

the

Histogram

button at the bottom of the dialog.

7. Touch a math trace in which to place the resulting histogram, then close the pop-up menu.

8. Touch the math trace label for the math trace you just created.

Summary of Contents for WaveRunner 104MXI










































































































































































































































Search results

Summary of Contents for WaveRunner 104MXI

Reviews:

Brands by name

Popular brands

LeCroy WaveRunner 104MXI, Operator'S Manual

Search results

Summary of Contents for WaveRunner 104MXI

Reviews:

Brands by name

Popular brands