manualshive.com logo in svg

LeCroy WaveRunner 104MXI, Operator'S Manual

Share
Download
LeCroy WaveRunner 104MXI Operator'S Manual Download Page 230

W

AVE

R

UNNER 

X

I 

S

ERIES 

 

 

230

 

 

WRXi-OM-E Rev B

 

 

 

Recalling Notebook Entries 

After a notebook entry is made, you can recall it at any time. The recall includes waveforms and oscilloscope 
settings. 

 

•

 

Select the notebook entry from the list box. 

•

 Touch 

the 

Flashback

 button. 

To exit Flashback, touch the 

Undo Flashback

 button in the top-right corner of the screen, or press the 

Auto

 

trigger button. 

PLEASE NOTE THE FOLLOWING 

The flashback feature currently recalls the DSO Setup, and all displayed waveforms. Some forms of ‘result 
data’ are not recalled, including:

 

•

  Persistence data. This will be saved in the hardcopy, and will be printed in the report, but will not be recalled 

during Flashback. 

•

  Histogram data. Histograms internally have a 32-bit resolution, but when stored into a trace file and recalled 

during flashback they are clipped to 16-bits. 

•

  Floating point waveforms. Certain math operations result in the creation of floating point waveforms with 

much higher resolution than can be stored in a 16-bit waveform file. This extra resolution will not be 
preserved when traces are recalled using flashback. 

•

  Cumulative Measurements. Any measurements that are on when the Lab Notebook entry is created are not 

saved individually in the database, other than being embedded in the hardcopy image. This means that 
when flashback is used, the measurements will be recomputed using the waveform data that was recalled. 
Normally this will not pose a problem, but if cumulative measurements were on, which accumulated data 
from multiple acquired waveforms, they will loose their history and show instead only the results from the 
stored waveforms. 

Creating a Report 

Once the notebook entry is created, you can easily generate a hardcopy report for e-mailing or printing. 

Previewing a Report 

Before creating a report, you can preview it by simply touching the 

View

 button 

. To exit the preview, 

touch the 

Close

 button at the right of the dialog. 

Summary of Contents for WaveRunner 104MXI










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands