manualshive.com logo in svg

LeCroy WaveRunner 104MXI, Operator'S Manual

Share
Download
LeCroy WaveRunner 104MXI Operator'S Manual Download Page 85

O

PERATOR

’

S 

M

ANUAL

 

WRXi-OM-E Rev B

  

 

85

 

3.  Touch the Properties button, and then check the

 File and Printer Sharing for Microsoft Networks

 

checkbox.  

 

Windows Setups 

If the instrument is to reside within a domain on your LAN, your IS administrator will have to connect the DSO. 

G

UIDELINES FOR 

W

ORKING IN 

W

INDOWS

 

Although the instrument has an open architecture, avoid modifying the Windows operating system, since this may 
cause problems for the instrument's user interface. Please follow these recommendations: 

•

 

Do not load any version of Windows not provided by LeCroy. If you load any Windows 2000 service packs 
from Microsoft, please be advised that LeCroy cannot guarantee trouble-free operation afterwards. 

•

 

Avoid modifying Control Panel settings. 

•

 

Do not change the color resolution (24 bit) or screen size (800 x 600 pixel) settings. 

•

 

After you load third-party software applications, if your oscilloscope does not work properly try reloading the 
instrument software from the CD shipped with the oscilloscope. 

•

 

Do not modify or remove any system fonts; doing so may affect the readability of the dialogs. 

•

 

Do not change any display properties like Background, Appearance, Effects, or Settings. Functionality of the 
oscilloscope or screen saver may be affected. 

•

 

Do not make any changes to the Windows folder. 

•

 

Do not make any changes to the BIOS settings. 

•

 

Do not make any changes to the Windows power management system. 

Summary of Contents for WaveRunner 104MXI










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands