5. PICTURE DISPLAY
76
The REF value in the user-defined correction table is entered when you press F•4 18%
REF-SET on the f Stop display.
For example, if you use the left-hand table shown below and press F•4 18% REF-SET when
the luminance value at the intersection of the cursors is 416 (10-bit value), the f Stop value at
that point (3.0) is displayed as the REF value.
→
Figure 5-21 User-defined correction tables
When the above user-defined correction tables are used, f Stop values are indicated as
shown below. The values between specified values are interpolated linearly.
When Lv = 152
f Stop = -3.0
When Lv = 240
f Stop = -2.0
When Lv = 328
f Stop = -1.0
When Lv = 416
f Stop = 0.0
When Lv = 504
f Stop = 1.0
When Lv = 592
f Stop = 2.0
When Lv = 680
f Stop = 3.0
When Lv = 768
f Stop = 4.0
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...
