5. PICTURE DISPLAY
89
SIZE = REAL
Figure 5-33 Selecting the display size
5.8.2
Gamut Error Display
To display the locations of gamut errors and luminance errors on the picture, follow the
procedure below.
These errors are defined by the ranges that you specify by setting Gamut Upper and Gamut
Lower, Composite Upper and Composite Lower, and Luminance Upper and Luminance
Lower in the status menu. If Gamut Error, Composite Gamut Error, or Level Error is set to
OFF, the corresponding errors are not displayed.
Reference Gamut Upper/Lower, Composite Upper/Lower
→ Section
8.2.3, “Error Setup 3”, Section 8.2.4,
“Error Setup 4”
Procedure
PIC
→
F•7
DISPLAY →
F•2 GAMUT ERR DISP: OFF / WHITE / RED / MESH
Settings
OFF:
Gamut errors are not displayed.
WHITE:
The picture intensity is halved, and gamut error are marked in white.
RED:
The picture intensity is halved, and gamut error are marked in red.
MESH:
Gamut errors are marked with a mesh pattern.
5.8.3
Turning the Information On and Off
To turn on and off the display of the following information that you arranged in the layout,
follow the procedure below.
This setting is valid on the display that appears when PIC is pressed. For multi display and
other displays, it is fixed to ON.
• Sub tab items (FORMAT, INPUT, TIME, DATE)
• Option tab options (Format, Input, Time)
Procedure
PIC
→
F•7
DISPLAY →
F•4 STATUS INFO: ON / OFF
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...
