8. STATUS DISPLAY
137
●
Inhibit Line Error
Select whether to detect embedding errors in the embedded audio.
OFF / ON
●
Sample Count Error
Select whether to detect sample number errors in the embedded audio.
An error is counted when audio that is asynchronous to the video is embedded. If a certain
number of audio data samples are not embedded in a certain number of video frames, it
will be considered and error (as defined in SMPTE ST 299 and SMPTE ST 272).
OFF / ON
8.2.3
Error Setup 3
Use the ERROR SETUP3 tab to configure gamut error settings.
STATUS
→
F•5
STATUS SETUP →
F•2 PREV TAB or F•3 NEXT TAB
→
Figure 8-4 ERROR SETUP3 tab
●
LowPass Filter
Select the frequency response of the low-pass filter used for gamut error and composite
gamut error detection. Set this to remove transient errors caused by overshoot and other
anomalies.
HD/SD:1MHz / HD:2.8MHz SD:1MHz / OFF
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...