2. VIDEO SIGNAL WAVEFORM DISPLAY
24
2.5
Configuring Line Selection Settings
To configure line selection settings, press F•4 LINE SEL on the WFM menu.
WFM
→
F•4
LINE SEL →
Figure 2-21 LINE SEL menu
2.5.1
Turning Line Selection On and Off
To display the vector of the selected line, follow the procedure below. You can use the
function dial (F•D) to select a line. The number of the selected line appears in the lower left
of the display.
Changing this setting will also change the vector-display and picture-display line selection
settings.
This menu item does not appear when SWEEP is set to V.
Reference
2.4.1, “Selecting the Sweep Method”
Procedure
WFM
→
F•4
LINE SEL →
F•1 LINE SELECT: ON / OFF
LINE SELECT = ON
LINE SELECT = OFF
Figure 2-22 Turning line selection on and off
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...
