5. PICTURE DISPLAY
65
5.3.1
Turning Line Selection On and Off
To display a marker on the selected line, follow the procedure below. You can use the
function dial (F•D) to select a line. The number of the selected line appears in the upper left
of the display.
Changing this setting will also change the video-signal-waveform-display and vector-display
line selection settings.
Procedure
PIC
→
F•3 LINE SE
L →
F•1 LINE SELECT: ON / OFF
LINE SELECT = ON
Figure 5-11 Turning line selection on and off
5.3.2
Setting the Line Selection Range
When F•1 LINE SELECT is set to ON and the input signal format is interlaced or segmented
frame, to set the line selection range, follow the procedure below.
Changing this setting will also change the selected line on the video-signal-waveform, vector,
and status (data dump) displays.
Procedure
PIC
→
F•3
LINE SEL →
F•2 FIELD: FIELD1 / FIELD2 / FRAME
Settings
FIELD1:
A line from field 1 can be selected. (Example: 1 to 563)
FIELD2:
A line from field 2 can be selected. (Example: 564 to 1125)
FRAME:
All lines can be selected. (Example: 1 to 1125)
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...
