SoundAdvisor Model 831C
Making a Time History Measurement With Sound Markers
16-4
16.2 Making a Time History Measurement ith Sound Markers
The 831C Time History option also allows you to place sound type
markers in the time history data as the sounds occur or during your
post measurement analysis.
To make a measurement with sound markers, follow these steps:
Before you begin:
• Complete steps 1–4 of
16.1 Setting up a Measurement ith
Step 1
With your Time History setup file highlighted in the Setup Manager, press
the top softkey (
//*
) until the
Markers
tab appears.
FIGURE 16-1
Setup Manager Markers Tab
Step 2
If desired, edit the marker names.
Step 3
Select the checkbox in-line with markers you want to use for this
measurement.
TAKE NOTE
If you’re also planning to make sound recordings, section
Up Markers for Sound Recording
is a good reference.
