SoundAdvisor Model 831C
Connecting to an Ethernet Port
13-1
Module 13
831C Network and Connections
In this module:
13.1 Connecting to an Ethernet Port ........................................................................................13-1
13.2 Setting Up the Meter’s Network ID ...................................................................................13-1
13.3 Setting a Static IP Address ................................................................................................13-2
13.3.1 Setting Up Alert Notifications When Using a Static IP Address ........................13-2
13.4 Using WiFi On Your 831C SoundAdvisor ...........................................................................13-3
13.4.1 Connecting to a WiFi Network ............................................................................13-3
13.4.2 Using 831C as a WiFi Access Point ......................................................................13-4
13.1 Connecting to an Ethernet Port
T
o connect the 831C to an Ethernet port, follow these steps:
Step 1
Verify that you have the following equipment:
• SoundAdvisor Model 831C SLM
• DV 012 USB/Ethernet dongle
• Ethernet cable
• A functional Ethernet network port
Step 2
Connect the assembly as shown in Figure 13-1 831C Connected to
Ethernet.
FIGURE 13-1
831C Connected to Ethernet
13.2 Setting Up the Meter s Network ID
You can access your meter’s networking properties (which includes the
network password, IP address, and MAC address) in 2 locations:
Insert the Ethernet adapter
(DV 012) into the auxiliary port
on the bottom of the 831C.
Connect the Ethernet
cable to the Ethernet
adapter (DV 012)
Plug in to an Ethernet port
in a wall jack or in another
supported device.
NOTE
:
Ethernet connections
consume a high amount of
power. We recommended
that you also connect the
meter to an external power
source (or by USB) while
connected.
