SoundAdvisor Model 831C
Creating a Custom Setup File
6-7
FIGURE 6-10
Setup Manager: (Optional) eather Tab
When you install a weather sensor for the 831C (such as SEN031, or
SEN032), the Weather Tab is active in the Setup Manager.
LEARN MORE
For more information about weather accessories, view the
SoundAdvisor brochure at www.LarsonDavis.com.
Choose your settings as shown in
Figure -10
. Once you
Close
and save
the Setup, you can observe the weather readings on the Overall Tab:
Weather Page as shown in
Figure -11
.
FIGURE 6-11
Overall Tab: eather Page
6.2.3 Choosing a Run Mode
Before you begin:
• Complete the processes described in the previous sections of
6.2 Creating a Custom Setup File
.
This section applies only when weather accessories are
connected to the 831C. On the Setup Manager Weather tab, set
the
eather
station type and any other applicable values for
the measurement of wind speed, wind direction, temperature
and humidity.
If the wind speed is above the
Threshold
, it is considered
windy.
If
Excd. Pause
is set to
Yes
, when the wind speed exceeds
Excd. Level
, sound exceedances are held off.
During a wind exceedance (with sound exceedance paused),
the wind speed must drop below the
Hysteresis
before sound
exceedance pause is turned off.
“
indy
” indicates the wind speed is
36.8% faster than the Threshold
level.
Red line indicates the compass wind
direction.
