SoundAdvisor Model 831C
Viewing Measurement History Data Files
15-6
d.
Select any additional settings on the Setup Manager tabs. For
more information, see
6.2.2 Customizing Setup Values On the
Setup Manager Tabs
.
e.
Press
Close
(
/*/
) and save your Setup.
f.
Set it as the Active setup file.
Selecting Daily Timer Mode With Measurement History
a.
Enter a
Start (y-m-d)
date and
Time
, and an
End (y-m-d)
date
and
Time
, where
Time
is the time of day.
b.
If desired, select the checkbox in-line with
2
, and
3
to enter
additional measurement periods.
c.
Select
the
Enable Measurement History
checkbox.
d.
If you want to send a measurement interval exceedance alert,
select your preferred method in-line with
Alerts
, and select a
Trigger Source
and
Trigger Level (dB)
for the alert. The Trigger
Level cannot be less than 0.1 (dB).
TAKE NOTE
Trigger Sources
for this alert include the following statistics:
LAeq,
LCeq, LZeq, Lmax, Lmin
, and all 6 values of
Ln
. If the current dB level is
greater than the Trigger Level (dB)
of the selected Trigger Source
at any
time during the current measurement interval, the 831C sends an alert
notification via email or text when the interval ends.
e.
Select any additional settings on the Setup Manager tabs. For
more information, see
6.2.2 Customizing Setup Values On the
Setup Manager Tabs
.
f.
Press
Close
(
/*/
) and save your Setup.
g.
Set it as the Active setup file.
Recommended Next Steps
• Make a measurement. For more information, see
Module
• View and interpret the resulting data. For more information, see
15.2 Viewing Measurement History Data Files
15.2 Viewing Measurement History Data Files
In this section:
•
15.2.1 Viewing Live Measurement Interval Data
•
15.2.2 Viewing Measurement History Data
•
