SoundAdvisor Model 831C
Creating a Custom Setup File
6-9
a.
Enter the measurement length in the
Time (hh:mm:ss)
field.
Step 2
If desired, enable any additional settings on the Control tab, and move to
section
6.2.4 Setting Triggers for Exceedances or Events
.
Using Stop When Stable Mode
Step 1
Select
Stop When Stable
from the Run Mode drop-down menu.
Step 2
Enter values for
Delta (dB)
and
Time
as stability parameters. If the
parameter is detected, the measurement stops.
Step 3
If desired, enable any additional settings on the Control tab, and move to
section
6.2.4 Setting Triggers for Exceedances or Events
.
Using Continuous Mode
In this mode, when the meter is powered on, a measurement runs
continuously and stores data files according to the Daily Auto-Store
value you set. If you set
Daily Auto-Store
to
Never
, the meter defaults
to your meter preferences for Auto-Store. If a measurement is paused,
Continuous mode automatically resumes the measurement after 5
minutes.
Step 1
Select
Continuous
from the Run Mode drop-down menu.
a.
Select an option from the
Daily Auto-Store
drop-down, and
enter the time of day the data file should be stored in the
Time
(hh:mm:ss)
field.
TAKE NOTE
At the end of the Auto-Store period,
the 831C saves measurement
record to a new, incrementally-named, data file throughout the day
based on the
Time (hh:mm:ss)
. Time indicates the time of day of the
first auto store.
TRY THIS
If you want to store a data file each hour of the day beginning at 10:05,
choose the following settings:
•
Auto-Store
: 1 h
Recommended for:
on-site or off-site control of a measurement
Strength:
Measures sound or noise until it changes.
Recommended for:
continuous noise measurement
Strength:
Totally autonomous; automatic restart in case
of power failure.
