Larson Davis SoundAdvisor Reference Manual Download Page 122

Page: 122 / 210

SoundAdvisor Model 831C

Viewing Measurement History Data Files

15-8

• To change the displayed record, shift to a non-spectrum page,

then return to the frequency spectrum display.

Non-Spectra Displays

On screens that do not contain frequency spectrum displays, use the

RIGHT and LEFT navigation buttons (

and

) to step right and left

through the selected measurement record numbers.

15.2.3 Viewing Measurement History Data From a Stored File

TAKE NOTE

We recommend using the G4 LD Utility for viewing data files on your

PC. For more information, see the

G4 LD Utility Manual

Summary of Contents for SoundAdvisor



















































































































































































































Search results

Summary of Contents for SoundAdvisor

Reviews:

Related manuals for SoundAdvisor

Brands by name

Popular brands

Larson Davis SoundAdvisor, Reference Manual

Search results

Summary of Contents for SoundAdvisor

Reviews:

Related manuals for SoundAdvisor

Brands by name

Popular brands