laguna S45T, Manual, Page: 59 / 80

Page 59 of 60
5.2 PERIODICAL MAINTENANCE
Periodically clean the inside of the machine from eventual presence of shaving or dust. Machine cleaning
increases the machine life and its performance.
To replace the ball bearings you should call skilled technician, then for this necessity contact your local
agent.
Clean the spindle with compressed air.
Do not get oil on the pulleys and belts. If they are dirty, use paper or a soft rag to clean and dry them.
Never place the V-belt under excessive strain, as this can overload the motor and damage the bearings,
spindle or belt.
5.3 KEY HANDLE FOR CONTROL CABINET
Using special key handle (A), open the control cabinet as shown.(Fig. 5.2)
5-2
Fig. 5.1