laguna S45T, Manual, Page: 57 / 80

Page 57 of 60
4.3 TENONING
The provided miter gauge and clamp can be used for tenoning operations. The tenoning hood fitted with
adjustable sections shall be used to guard the tool form above the work-piece and from the sides.
《
WARNING
》
Keep guards in place and in working order. Always use tenoning hood when processing
tenoning machining.
4.4 CURVED WORK
Keep guards in place and in working order. Always use curved work guiding when processing curved work.
Please buy the safety guard for curved work with a profession manufactures which products
are in
compliance with of relevant (CE) regulations,
such as Suva (French), Aigner(German) etc.
It is with integral outlet for connection with a dust and chip collection. To machine curved and circular
workpieces economically, accurately and with maximum regard for safety.
This safety and working unit enables fast and low risk machining of curved workpieces, the power feed unit
can also be used with this device. The guard can be easily and quickly fitted to the table of spindle moulder
with the use of tools. Adjustment for transparent guide height and position is both quick and accurate. It is
possible to use the guard for both clockwise and counter-clockwise machining. The guard brushes are
infinitely adjustable.
Example of curved work
Fig. 4.9
4-3