laguna S45T, Manual, Page: 20 / 80

Page 20 of 60
1.8 DIMENSIONS FOR SPINDLE AND TOOLS
Tool shall comply to EN 847-1:2005 and/or EN 847-2:2001.
Acceptable dimension for spindles and tools are given in Fig. 1.3
spindle diameter d
Maximum useable length of
spindle from the
shoulder l
1
Maximum tool diameter
(that can be mounted in the
guard)
d
2
d
1
g
6
Single
piece
spindle
Removable spindle Shaping Tenoning
30
b
mm 140 140 250 300
40
c
mm 180 160 250 350
50 mm 220 160 275 400
b
values given for d1=30 mm are also valid for spindle diameters larger
than 30mm and smaller than 40 mm.
c
values given for d1=40 mm are also valid for spindle diameters larger
than 40mm and smaller than 50 mm.
Fig. 1.3
1-17