laguna S45T, Manual, Page: 26 / 80

Page 26 of 60
To reverse the rotation of the spindle simply shut off the motor; then rotate the forward/reverse switch after
the spindle stop completely. For CE machine, a main switch is mounted on the right side of the machine frame.
Turning the switch to zero, indicate so with a sign and padlock it before servicing. The electrical cabinet door
is lockable. Always close and lock this door except for service.
《
WARNING
》
Never attempt to reverse the rotation of the spindle with the motor/spindle running.
Remember
！
《
CAUTION
》
Do not use the for/rev. switch to stop the machine or it will damage the electrical controls.
Use stop push button or brake pedal for normal stop.
《
WARNING
》
Open the electrical cabinet door only while the main switch is shut off, or it may result in
electric shock.
3.3 SPEED CHANGE AND BELT ADJUSTMENT
a)
the relationship between tool diameter, cutting length and max. rotational speed
Since the max. safe spindle speed will depend on:
a) The spindle diameter
b) Te usable length of the spindle
c) The length of cut
d) The tool cutting diameter
The following charts can be used to determine the max. spindle speed for various tool cutting diameters given
the values of d, l, and b.
3-2