laguna S45T, Manual, Page: 44 / 80

Page 44 of 60
3-19
3.17 SET-UP AND OPERATION OF CONTROL STSTEM FOR
PS-515/L
PS-515 plus, please refer to the addition instruction.
Type A- 9 different settings of spindle height positions.
CONTROL PANEL / FUNCTION OF KEYS
Fig.3.46 illustrates the control panel of programmable spindle molder PS-515/L
Fig. 3.46
A.
Power on
B.
Power off
C.
Forward/reverse switch-for spindle rotation
D.
Emergency stop
E.
Main motor start
F.
Main motor stop
《
NOTE
》
Main motor will not start if forward/reverse switch is in neutral (“O”) position.
G.
Manual operation for spindle height adjustment
H.
Automatic operation for spindle height adjustment
I.
Quick tool change ON (Under Manual operation)
J.
Quick tool change OFF (Under Manual operation)
K.
Spindle height adjustment-up
L.
Spindle height adjustment-down
3-20