laguna S45T, Manual, Page: 43 / 80

Page 43 of 60
3-18
3.16 INSTALLING CURVED WORK GUIDING
(optional)
The machine should be equipped with the curved work guiding
when doing curved work. Please buy the safety guard for curved
work with a profession manufactures which products
are in
compliance with of relevant (CE) regulations
such as Suva
(French), Aigner(German) etc.
The curve-cutting safety guard allows curved workpieces to be
safely and economically shaped.
■ Good view of the workpiece from above and from the front,
thanks to the window and the transparent guard
■ Pressure on the workpiece can be adjusted
Fig. 3.45
■ Integral connection outlet for a chip and dust extraction
■ Very robust aluminium die casting
■ Quick and easy to adjust
■ Available in different versions
For moulding curved workpieces. A ball-bearing race (ball ring guard) or a curve cutting fence (ring guard) can
be used as a fence. Consists of a curve-cutting safety guard, integral feed guide and two screws for installation
on the machine table.
ring guard:
Two curve ring guard for large and small
curves with the required fixing bolts
ball ring guard: inner bore diameter 30 mm, 35 mm,
40 mm, 50 mm, 1.25 inch and 1.5 inch.