
Page 33 of 60
3.6 SPINDLE VERTICAL TRAVEL ADJUSTMENT
FOR 5-SPEED SPINDLE MOULDER
TYPE A
1.
Loosen handwheel lock (A) Fig. 3.16, before making adjustment of
spindle height.
2.
To raise the spindle, turn handwheel (B) counterclockwise and to
lower the spindle, turn handwheel (B) clockwise.
3.
Tigten handwheel lock (A) when desired spindle height is obtained.
4.
One complete turn of the handwheel moves the spindle up or down
by 1 or 2.5mm indicated on the machine frame.
Fig. 3.16
TYPE B
1.
Loosen locking lever (A) and knob (b) Fig. 3.17, before making
adjustment of spindle height.
2.
To raise the spindle, turn handwheel (C) counterclockwise and to
lower the spindle, turn handwheel (C) clockwise.
3.
Tigten knob (B) and locking lever (A) when desired spindle height is
obtained.
4.
The dial indicator (D) is for the use of micro-adjustment of spindle.
5.
One complete turn of the handwheel moves the spindle up or down
by 1 or 2.5mm indicated on the machine frame.
Fig.3.17
TYPE C
1.
Loosen the locking handle (A) and knob (B) Fig. 3.18.
2.
Turn the handwheel (C) and adjust the height to the required
position.
3.
Lock the knob (B) and locking handle (A).
4.
One complete turn of the handwheel moves the spindle up or down
by 1mm.
Fig.3.18
Digital read-out (A) Fig. 3.19, for spindle height is available for some
specific models.
Fig.3.19
3-9
Summary of Contents for S45T
