manualshive.com logo in svg

Kyocera TASKalfa 7353ci, Operation Manual

Share
Download
Kyocera TASKalfa 7353ci Operation Manual Download Page 570

10-37

Troubleshooting > Troubleshooting

Cannot print the 
specified number of 
copies.

*1

—

Only one copy is available. 
Select [

Continue

] to continue 

printing. Select [

Cancel

] to 

cancel the job.

—

Cannot process this 
job.

*1

―

Restricted by Authorization 
settings. The job is canceled. 
Select [

End

].

―

―

Restricted by Job Accounting. 
The job is canceled. Select 
[

End

].

page 9-35

Cannot punch at the 
specified position.

Have you selected a position 
that cannot be punched?

If the selected paper is not 
changed and [

Continue

] is 

selected, punch is released.
Select the available paper. 
Select [

Continue

] to print.

page 6-29

Cannot punch this 
paper.

Did you select a paper size/type 
that cannot be punched?

If the selected paper is not 
changed and [

Continue

] is 

selected, punch is released.
Select the available paper. 
Select [

Continue

] to print.

page 6-29

Cannot read data in 
this ID card.

―

In registration process, the ID 
card information was not read 
correctly. Hold again the ID card 
over the ID card reading part.
If the same message still 
appears, the
ID card may not be compatible 
with this product. Change it to 
another ID card.

―

Cannot recognize.

―

Make sure your ID card has 
been registered.

―

Cannot staple at the 
specified position.

Have you selected a position 
that cannot be stapled?

If the selected paper is not 
changed and [

Continue

] is 

selected, staple is released.
Select the available paper. 
Select [

Continue

] to print.

page 6-27

Cannot staple this 
paper.

*1

Did you select a paper size/type 
that cannot be stapled?

If the selected paper is not 
changed and [

Continue

] is 

selected, staple is released.
Select the available paper. 
Select [

Continue

] to print.

page 6-27

Cannot use ##### due 
to a failure.

―

Call service.

―

Check the document 
processor.

Is the top cover of the document 
processor open?

Close the document processor 
cover.

―

Is the document processor 
open?

Close the document processor.

―

Message

Checkpoints

Corrective Actions

Reference 

Page

Summary of Contents for TASKalfa 7353ci




















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands