Kyocera TASKalfa 7353ci, Operation Manual

Page: 592 / 723

10-59
Troubleshooting > Adjustment/Maintenance
2
As shown in the illustration, place the printed side down on the platen with the edge with
the arrows toward the back.
3
Select [ Start ]. The pattern is read and adjustment begins.
The second pattern is output.
4
Check that the number "2" (to "3") is printed at the bottom of the pattern and repeat steps 2
to 3 twice to read pattern 2 and 3 in sequence.
5
Select [ OK ] in the adjustment end confirmation screen.
Drum Refresh
Remove image blur and white dots from the printout.
1
Display the screen.
[ System Menu/Counter ] key > [ Adjustment/Maintenance ] > "Drum Refresh" [ Next ]
2
Perform the drum refresh.
Select [ Start ]. "Drum Refresh" begins.
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.