Kyocera Mita DC-2060, Service Manual

Page: 227 / 437

3-3-18
1AH
( 7 ) Adjustments after installing rollers and clutches
Perform the following adjustments after detaching and refitting the rollers and clutches.
(7-1) Adjusting the leading edge registration
Adjust the secondary paper feed timing if there is a regular error between the leading
edges of the original and the copy image.
Procedure
Is the leading edge
of the copy image too short
(example 1)?
Is the leading edge
of the copy image too long
(example 2)?
No
No
Yes
Yes
The copier enters ready mode. The new setting is stored.
The current setting is displayed.
* Mode 1: for copying at 100%
Mode 2: for enlargement copying
Mode 3: for reduction copying Select the mode No. with the ex-
posure adjustment keys.
Press the print key to make a test
copy.
Decrease the setting with the zoom
key.
Increase the setting with the zoom
key.
Press the print key.
Enter 27 with the numeric keys.
Enter simulation mode.
Press the print key. Press the interrupt key.
Start
A B