Kyocera Mita DC-2060, Service Manual

Page: 175 / 437

1AH
Sim.
No.
Description Remarks
52 Adjusting the DF leading edge registration
1 Enter 52 with the numeric keys.
2 Press the print key.
3 Select the mode number to be executed with the
exposure adjustment keys.
* Selected Mode No. is shown on the message
display and the copy number/zoom ratio indicator
shows the current setting of the mode number.
4 Change the setting with the zoom key.
5 Press the print key.
* The setting is stored and blinks. The interrupt
indicator blinks at the same time.
6 Press the interrupt key to test copy mode.
7 Press the print key to make test copies.
8 Press the stop/clear key.
54 Adjusting the leading/trailing edge margin
• See page 3-3-20, 3-3-22.
55 Adjusting the blank cut margin with the DF
1
Enter 55 with the numeric keys.
2
Press the print key.
* The copy number/zoom ratio indicator shows the
current setting.
3 Change the setting with the zoom keys.
4 Press the print key.
* The setting is stored and blinks. The interrupt
indicator blinks at the same time.
5 Press the stop/clear key.
ADF mode
RADF mode 1
2
Adjustment mode
Mode
No.
Amount of change
by one step
Default
0.42 mm
0.42 mm 100
100
Setting range
37 – 163
37 – 163
Adjusting stop
position of the
RADF original.
Sets the blank
cut margin to
eliminate the
shadow of the
DF original
conveying belt by
changing the
number of blank
lamps turned on.
Setting Contents
0
1
2
Normal
Small blank cut margin
Large blank cut margin
3-2-24