Kyocera Mita DC-2060, Service Manual

Page: 203 / 437

1AH
Sim.
No.
Description Remarks
94 Setting the memory switch 1
1 Enter 94 with the numeric keys.
2 Press the print key.
3 Select the mode No. with the exposure adjustment
keys.
* The exposure scale indicator corresponding to the
selected mode No. (digit) blinks and the copy
number/zoom ratio indicator shows the current
setting of the selected mode.
*1: For metric models only
*2: When “1” is selected and there is an original left
on the contact glass, DF dose not operate.
4 Change the setting with the zoom keys.
5 Press the print key.
* The setting is stored and blinks. The interrupt
indicator blinks at the same time.
6 Press the stop/clear key.
Contents
Mode
No.
1 0
Setting
1
2
3
4
5
6
7
Auto prescanning function setting
B4/B5 split copy function setting*
1
Manual density range setting
Selecting copying enabled/
disabled with originals left on the
copier
Paper feed timing with DF setting
E2000 setting
—
enabled
disabled
enabled
disabled
at the same
time as the
original
paper feed
enabled
—
disabled
enabled
disabled
enabled*
2
at the same
time as the
original is
set
disabled
—
3-2-44
Mode No. Mode No. Indicator Indicator
1
2
3
4
5
6
EXP. 1 lights
EXP. 2 lights
EXP. 3 lights
EXP. 4 lights EXP. 5 lights
EXP. 6 lights
1AH