Kyocera Mita DC-2060, Service Manual

Page: 340 / 437

3-3-125
1AH
10. Refit all the removed parts.
* Replace the duplex registration clutch so that the notch in the duplex registration
clutch engages with the tab of the frame and that end of the shaft is aligned with the
end of the projection that holds the hex. socket head screws in place.
End of the projection
for the hex. socket
head screws
Hex. socket head
screws
Duplex registration clutch
End of the shaft
Tab of the frame
Notch
Figure 3-3-124
* Install the side registration section while raising the pulse disc guide. After the
installation, check that the pulse disc guide is in the down position. (see page 3-3-
122)
* After installing the side registration section, always proceed to ( 8 ) Adjusting the
position of the side registration section. (see page 3-3-133)