Kyocera Mita DC-2060, Service Manual

Page: 174 / 437

1AH
Sim.
No.
Description Remarks
49 Setting the preheat mode
1 Enter 49 with the numeric keys.
2 Press the print key.
* The copy number/zoom ratio indicator shows the
current setting.
3 Change the setting with the zoom key.
4 Press the print key.
* The setting is stored and blinks. The interrupt
indicator blinks at the same time.
5 Press the stop/clear key.
50 Lighting all the indicators on the operation panel
1
Enter 50 with the numeric keys.
2
Press the print key.
* All LEDs on the operation panel light up.
3 Press the stop/clear key.
* The LEDs turn off.
Setting preheat mode Setting Remarks
0
1
2
Energy saving mode
Return time mode
Return time 0 s
The fixing temperature is
controlled at the setting
temperature in mode No. 3 of
simulation 46 during preheat.
The fixing temperature is
controlled at the setting
temperature in mode No. 2 of
simulation 46 during preheat.
The fixing temperature is
controlled at the setting
temperature in mode No. 1 of
simulation 46 during preheat.
Checks the
operation panel
LEDs.
3-2-23