Kyocera Mita DC-2060, Service Manual

Page: 38 / 437

1AH
1-3-14
(1-2) Paper feed from bypass tray
The bypass tray can hold up to 50 sheets of paper at the one time.
When copying starts, the bypass solenoid (BYPSOL) comes on and the bypass stopper is
released and at the same time, the SB forwarding pulley comes down into contact with the
paper and the paper set on the bypass table is feed to the SB upper paper feed pulley and
the SB lower paper feed pulley.
In this state, the bypass paper feed clutch (BYPCL) comes on, the drive motor (DM) drive
is transmitted to the SB upper paper feed roller and the SB lower paper feed roller and the
primary paper feed starts. The SB lower paper feed roller rotates in the opposite direction
from the paper feed direction and prevents multiple sheets from being feed through the
operation of its one-way clutch.
5
1
2
3
0
9
8
7
4
6
1 Bypass solenoid (BYPSOL) 6 SB upper paper feed pulley
2 SB forwarding pulley 7 Bypass lower guide
3 Bypass stopper 8 SB lower paper feed pulley
4 Bypass upper guide 9 Bypass friction plate
5 Bypass paper switch (BYPPSW) 0 Bypass tray
Figure 1-3-12 Bypass paper feed section