Kyocera Mita DC-2060, Service Manual

Page: 224 / 437

3-3-15
1AH
( 4 ) Adjusting the position of the original size indicator
Perform the following adjustment if there is a regular error between the centers of the
original and the copy image.
Procedure
Yes
No
Press the print key to make a test
copy (the magnification ratio is au-
tomatically set to 90%).
Place A3/11" 17" paper on the
contact glass and keep the origi-
nal holder open.
Loosen the two screws holding the
original size indicator and adjust
the position of the indicator so that
the centers of the original and the
copy image are aligned.
• When the width of stripe (a) is
wider than that of (b), move it to-
ward the machine rear (
a
).
• When the width of stripe (a) is
narrower than that of (b), move it
toward the machine front (
f
).
Press the print key.
Enter 16 with the numeric keys.
Enter simulation mode.
Start
End
Is a equal to b?
×
a b
Test copy example
Figure 3-3-18
Screws
Original size indicator
Figure 3-3-19