Kval MLX, Operation And Service Manual

Page: 33 / 144

Machine Components.
2-3
KVAL MLX Operation/Service Manual
Machine Components.
Components Descriptions
Operator’s Station The operator’s station is a multi use station. It houses the MLX
touchscreen, operation switches and other machine controls in
the production line.
Local Machine Controls The Local Machine Control is located on the front side of the
machine and includes:
Start Sequence, Call Door, Emergency
Stop, and Door Length Select
Door Stops The door stops act as a door placement guide for different
sized doors.
Pedal Foot Pedal controls: Controls include:
Emergency Stop, Door
Stop, and Door Clamp.
Electrical Panel There is a Electrical Panel, located near the back section of the
machine. The Panel contains power inputs and outputs, PLC,
and drivers to run the motors on the machine.
Door Clamps Nine pneumatic controlled clamps secure the door during
machining.
Router Routs Strike Plate, Lock Plate, Flush Bolt pockets, slots etc on
the edge of the door.
CR Router Performs the same as the Standard Router, but prevents tear-
outs on the edge of the door and due to the different size drill
can make size appropriate cuts.
Lock Drill Plunges through the door face to machine lock trim holes
(OPT) Pre-Drill Pre-drills pilot holes to the edge of the door.