Kval MLX, Operation And Service Manual

Page: 52 / 144

About the Main Control Screen
KVAL MLX Operation/Service Manual
2-22
About the MLX Main Control Section
At this section control machine operations.
Home Machine
This button starts the home sequence on the machine, which scans to find a physical
reference point on the frame. When this point is found, the position is stored and then
used to calculate the location of all moves during the machine process. The home
sequence must be performed every time the machine is powered up or reset.
Reset Machine
If a fault occurs that cannot be cleared, press the
Reset Machine
button. This button
will reset the machine to the start position.
Important:
Press the
Home
button after resetting the machine
Setup Mode On/Off
Select
Setup Mode
to toggle on or off. In the
On
mode, a safe mode is active. The
machine will go through normal sequences except the cutting motors will be inactive.
Use this mode to check the machine operation without making a cut on the door. With
the setup mode set to on, the button will change to an orange background.
In the
Off
mode the machine is in normal operation.Select to stop (abort) the process of
the door that is currently running.
About the Sequence Control Section
Start the process of machining a door at this section.